Chapter 30 VRRP
GS2200-48 User’s Guide
260
default gateway. If switch A has a higher priority, it is the master router. Switch B,
having a lower priority, is the backup router.
Figure 130 VRRP: Example 1
If switch A (the master router) is unavailable, switch B takes over. Traffic is then
processed by switch B.
30.2 VRRP Status
Click IP Application > VRRP in the navigation panel to display the VRRP Status
screen as shown next.
Figure 131 IP Application > VRRP Status
The following table describes the labels in this screen.
172.16.1.
172.16.1.
172.16.1.
Table 94 IP Application > VRRP Status
LABEL DESCRIPTION
Index This field displays the index number of a rule.
Network This field displays the IP address and the subnet mask bits of an IP routing
domain that is associated to a virtual router.
VRID This field displays the ID number of the virtual router.
To Next Page
Loading...
