Chapter 38 Cluster Management
GS2200 Series User’s Guide
285
38.1.1 What You Can Do
•Use the Cluster Management screen (Section 38.2 on page 285) to view the role of the Switch
within the cluster and to access a cluster member switch’s web configurator.
•Use the Clustering Management Configuration screen (Section 38.1 on page 284) to
configure clustering management.
38.2 Cluster Management Status
Use this screen to view the role of the Switch within the cluster and to access a cluster member
switch’s web configurator.
Click Management > Cluster Management in the navigation panel to display the following
screen.
Note: A cluster can only have one manager.
Figure 193 Management > Cluster Management: Status
The following table describes the labels in this screen.
Table 122 Management > Cluster Management: Status
LABEL DESCRIPTION
Status This field displays the role of this Switch within the cluster.
Manager
Member (you see this if you access this screen in the cluster member switch directly and not
via the cluster manager)
None (neither a manager nor a member of a cluster)
Manager This field displays the cluster manager switch’s hardware MAC address.
The Number of
Member
This field displays the number of switches that make up this cluster. The following fields
describe the cluster member switches.
Index You can manage cluster member switches via the cluster manager switch. Each number in
the Index column is a hyperlink leading to the cluster member switch’s web configurator
(see Figure 195 on page 288).
MacAddr This is the cluster member switch’s hardware MAC address.
Name This is the cluster member switch’s System Name.
To Next Page
Loading...
