ZyXEL Communications GS2210-24 - Ipv6 Configuration; Ipv6 Global Setup

Chapter 8 Basic Setting
GS2210 Series User’s Guide
84
8.10.2 IPv6 Configuration
Use this screen to configure IPv6 settings on the Switch. Click the I Pv6 Configuration link in the
Basic Setting > I Pv6 screen. The following screen opens.
Figure 61 Basic Setting > IPv6 > IPv6 Configuration
The following table describes the labels in this screen.
8.10.3 IPv6 Global Setup
Use this screen to configure the global IPv6 settings. Click the link next to I Pv6 Global Setup in
the I Pv6 Configuration screen to display the screen as shown next.
Table 23 Basic Setting > I Pv6 > I Pv6 Configuration
LABEL DESCRIPTION
IPv6 Global
Setup
Click the link to go to a screen where you can configure the global IPv6 settings on the
Switch.
IPv6 Interface
Setup
Click the link to go to a screen where you can enable an IPv6 interface on the Switch.
IPv6
Addressing
IPv6 Link-
Local
Address
Setup
Click the link to go to a screen where you can configure the IPv6 link-local address for an
interface.
IPv6
Global
Address
Setup
Click the link to go to a screen where you can configure the IPv6 global address for an
interface.
IPv6 Neighbor
Discovery
IPv6
Neighbor
Discovery
Setup
Click the link to go to a screen where you can configure the IPv6 neighbor discovery settings.
IPv6 Neighbor
Setup
Click the link to go to a screen where you can create a static IPv6 neighbor entry in the
Switch’s IPv6 neighbor table.
DHCPv6 Client
Setup
Click the link to go to a screen where you can configure the Switch DHCP settings.