ZyXEL Communications GS3700 Series - Page 149

Chapter 11 Spanning Tree Protocol
GS3700/XGS3700 Series User’s Guide
149
Figure 101 Advanced Application > Spanning Tree Protocol > MSTP (Stacking mode)
The following table describes the labels in this screen.
Table 62 Advanced Application > Spanning Tree Protocol > MSTP
LABEL DESCRIPTION
Status Click Status to display the MSTP Status screen (see
Figure 104 on page 154).
Active Select this check box to activate MSTP on the Switch. Clear this checkbox to disable MSTP
on the Switch.
Note: You must also activate Multiple Spanning Tree in the Advanced Application >
Spanning Tree Protocol > Configuration screen to enable MSTP on the Switch.
Hello Time This is the time interval in seconds between BPDU (Bridge Protocol Data Units)
configuration message generations by the root switch. The allowed range is 1 to 10
seconds.