Chapter 14 Mirroring
GS3700/XGS3700 Series User’s Guide
173
Figure 116 Advanced Application > Mirroring > RMirror > Connected Port (Stacking mode)
The following table describes the labels in this screen.
Table 73 Advanced Application > Mirroring > RMirror > Connected Port
LABEL DESCRIPTION
RMirror VLAN ID Select the RMirror VLAN over which the mirrored traffic is forwarded.
Slot (Stacking mode) This field appears only in stacking mode. Click the drop-down list to choose the slot
number of the Switch in a stack.
Port (Standalone or
stacking mode)
This field displays the port number. In stacking mode, the first box field is the slot I D
and the second field is the port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this
row first to set the common settings and then make adjustments on a port-by-port
basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
To Next Page
Loading...
