ZyXEL Communications GS3700 Series - Link Aggregation ID

Chapter 15 Link Aggregation
GS3700/XGS3700 Series User’s Guide
176
Configure trunk groups or LACP before you connect the Ethernet switch to avoid causing network
topology loops.
15.2.1 Link Aggregation ID
LACP aggregation ID consists of the following information. Port Priority and Port Number are 0 as it
is the aggregator ID for the trunk group, not the individual port.
15.3 Link Aggregation Status
Click Advanced Application > Link Aggregation in the navigation panel. The Link Aggregation
Status screen displays by default. See Section 15.1 on page 175 for more information.
Figure 117 Advanced Application > Link Aggregation Status
Table 74 Link Aggregation ID: Local Switch
SYSTEM
PRIORITY
MAC ADDRESS KEY PORT PRIORITY PORT NUMBER
0000 00-00-00-00-00-00 0000 00 0000
Table 75 Link Aggregation ID: Peer Switch
SYSTEM
PRIORITY
MAC ADDRESS KEY PORT PRIORITY PORT NUMBER
0000 00-00-00-00-00-00 0000 00 0000