ZyXEL Communications IES-1000 - Delete N-wire Group Command; Delete Port Bonding Command; List N-wire Groups Command; Show Channels Command

IES-1000 User’s Guide
13-8 Virtual Channel Management
DSL Port VC Profile Add or Edit Screen
Do the following to open the VC Profile screen:
Step 1. Click a DSL port's index number in the Port Setup screen to go to the DSL Port Setup screen.
Step 2. Click Channel Setup in the DSL Port Setup screen to go to the Channel Setup screen.
Step 3. Click VC Profile in the Channel Setup screen to open the VC Profile screen.
Step 4. Click the Add button in the VC Profile screen to add a new VC profile or click an existing VC profile’s
link in the Profile Name column to edit the profile.
Figure 13-5 DSL Port VC Profile Add
Table 13-3 DSL Port VC Profile Add
LABEL DESCRIPTION
VC Profile Setup Click this link to go to the VC Profile Setup screen.
Profile Name When editing a profile, this is the name of this profile. When adding a profile, type a name for
the profile.
Encap. Select the encapsulation type (LLC or VC) for this port.
AAL Select the ATM Adaptation Layer (0, 3, 4 or 5).