ZyXEL Communications IES-1000 - Figure 6-3 SHDSL Port and MDF Connections

IES-1000 User’s Guide
Hardware Connections 6-3
Figure 6-3 SHDSL Port and MDF Connections
Step 3. Connect a different telephone wire to the lower port of the MDF using a punch-down tool.
Step 4. Connect the other (RJ-11) end of the telephone wire to the end-user G.SHDSL modem/router.
When you finish this procedure your connections should look similar to the figure shown next. Connections
between the user’s computer and modem/router are not described here.