IES-1000 User’s Guide
7-2 Turning On the IES-1000
Figure 7-2 SAM1008 Front Panel LEDs
Figure 7-3 AAM1008 Front Panel LEDs
Table 7-1 Network Module LED Descriptions
LED COLOR STATUS DESCRIPTION
ALM Red On The module has overheated.
Off The module is functioning within normal temperature parameters.
SYS Green Blinking The system is initializing.
On The module is on and functioning properly.
Off The system is not receiving power, is not ready or has a malfunction.
SHDSL (1-8) Green On The DSL link is up.
or ADSL (1-8) Off The DSL link is down.
LAN Green Blinking The system is transmitting/receiving to/from a 10 Mbps Ethernet network.
On The link to a 10 Mbps Ethernet network is up.
Off The link to a 10 Mbps Ethernet network is down.
Yellow Blinking The system is transmitting/receiving to/from a 100 Mbps Ethernet network.
On The link to a 100 Mbps Ethernet network is up.
Off The link to a 100 Mbps Ethernet network is down.
To Next Page
Loading...
