ZyXEL Communications LTE3302-M432 - Introduction

LTE3302-M432 & LTE3312-M432 User’s Guide
12
CHAPTER 1
Introduction
1.1 Overview
The LTE3302-M432 is a wireless router and the LTE3312-M432 is a wireless IAD (Integrated Access Device)
which is a router with a phone port for Internet phone calls.
1.1.1 Operating Modes
The LTE Device supports Bridge mode and Router mode.
• Router mode: This is the default operating mode of the LTE Device. Use Router mode if you want to use
routing functions, such as firewall, DHCP, NAT, and so on.
The following figure shows an example of the LTE Device in Router mode.
Figure 1 The LTE Device in Router Mode
• Bridge mode: Select Bridge mode if you already have a router in your network and you don't want to
reconfigure your network. If you don’t have a router, you’ll need multiple IP addresses from your ISP
for your clients.
Click the Edit button in the Configuration > Network > WAN > Management WAN screen. Select the
Enable check box in the Bridge field to use Bridge mode.