Chapter 2 Introducing the Web Configurator
LTE3302-M432 & LTE3312-M432 User’s Guide
27
IP Address This shows the WAN port’s IP address.
IP Subnet Mask This shows the WAN port’s subnet mask.
Default Gateway This shows the WAN port’s gateway IP address.
IPv6 Address This shows the IPv6 address of the LTE Device on the WAN.
Operation Band This shows the network type and the frequency band used by the mobile network
to which the LTE Device is connecting.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
DHCP This shows the LAN port’s DHCP role - Server or Disable.
IPv6 Address This shows the IPv6 address of the LTE Device on the LAN.
WLAN Information
WLAN OP Mode This is the device mode to which the LTE Device’s wireless LAN is set - Access Point
Mode.
MAC Address This shows the 2.4GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the LTE Device in the 2.4GHz wireless
LAN.
Channel This shows the channel number which you select manually.
System This shows the wireless standards the LTE Device supports.
Security This shows the level of wireless security the LTE Device is using.
Firewall This shows whether the firewall is enabled or not.
Caller Status (LTE3312-M432 only)
Item This column shows the caller ID when you make phone calls through the LTE3312-
M432.
Data This column shows the current state of the phone call.
System Status
Item This column shows the type of data the LTE Device is recording.
Data This column shows the actual data recorded by the LTE Device.
System Up Time This is the total time the LTE Device has been on.
Current Date/Time This field displays your LTE Device’s present date and time.
System Resource
- CPU Usage This displays what percentage of the LTE Device’s processing ability is currently
used. When this percentage is close to 100%, the LTE Device is running at full load,
and the throughput is not going to improve anymore. If you want some
applications to have more throughput, you should turn off other applications (for
example, using bandwidth management.)
- Memory Usage This shows what percentage of the heap memory the LTE Device is using.
Interface Status
Item This displays the LTE Device port types. The port types are: WAN, LAN and WLAN.
Table 9 Status Screen (continued)
LABEL DESCRIPTION
To Next Page
Loading...
