EasyManua.ls Logo

ZyXEL Communications LTE3302-M432 - WAN Configuration; WAN Overview and IPv6

ZyXEL Communications LTE3302-M432
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LTE3302-M432 & LTE3312-M432 User’s Guide
57
CHAPTER 6
WAN
6.1 Overview
This chapter discusses the LTE Device’s WAN screens. Use these screens to configure your LTE Device for
Internet access.
A WAN (Wide Area Network) connection is an outside connection to another network or the Internet. It
connects your private networks such as a LAN (Local Area Network) and other networks, so that a
computer in one location can communicate with computers in other locations.
3G and 4G standards for the sending and receiving of voice, video, and data in a mobile environment.
You can insert a 4G SIM card and set the LTE Device to use this 3G/4G connection as your WAN.
Figure 33 LAN/Wireless LAN and Wireless WAN
6.2 What You Can Do
Use the Management WAN screen to configure 3G/4G WAN connection settings (Section 6.4 on
page 60).
Use the Network Scan screen to specify the type of the mobile network to which the LTE Device is
connected and how you want the LTE Device to connect to an available mobile network (Section 6.5
on page 64).
Use the IPv6 screen to configure the LTE Device’s IPv6 settings (Section 6.6 on page 66).
Use the PIN Management screen to configure the LTE Device’s PIN settings (Section 6.7 on page 67).
LTE

Table of Contents

Other manuals for ZyXEL Communications LTE3302-M432

Related product manuals