Chapter 36 Cluster Management
MES-3528 User’s Guide
317
The following table explains some of the FTP parameters.
Table 113 FTP Upload to Cluster Member Example
FTP PARAMETER DESCRIPTION
User Enter “admin”.
Password The web configurator password default is 1234.
ls Enter this command to list the name of cluster member
switch’s firmware and configuration file.
390BHR0.bin This is the name of the firmware file you want to upload to
the cluster member switch.
fw-00-a0-c5-01-23-46 This is the cluster member switch’s firmware name as seen
in the cluster manager switch.
config-00-a0-c5-01-23-46 This is the cluster member switch’s configuration file name
as seen in the cluster manager switch.
To Next Page
Loading...
