ZyXEL Communications MGS3520 Series - MVR Configuration Example

Chapter 25 Multicast
MGS3520 Series User’s Guide
221
25.6.2 MVR Configuration Example
The following figure shows a network example where ports 1, 2 and 3 on the Switch belong to VLAN
1. In addition, port 7 belongs to the multicast group with VID 200 to receive multicast traffic (the
News and Movie channels) from the remote streaming media server, S. Computers A, B and C in
VLAN 1 are able to receive the traffic.
Figure 128 MVR Configuration Example
To configure the MVR settings on the Switch, create a multicast group in the MVR screen and set
the receiver and source ports.
Figure 129 MVR Configuration Example
To set the Switch to forward the multicast group traffic to the subscribers, configure multicast group
settings in the Group Configuration screen. The following figure shows an example where two
multicast groups (News and Movie) are configured for the multicast VLAN 200.
S
Multicast VID 200
VLAN 1
A
B
C
News: 224.1.4.10 ~ 224.1.4.50
1
Movie: 230.1.2.50 ~230.1.2.60
2
3
7
EXAMPLE