Chapter 27 IP Source Guard
MGS3520 Series User’s Guide
243
Figure 141 Advanced Application > IP Source Guard > DHCP Snooping
The following table describes the labels in this screen.
Table 106 Advanced Application > IP Source Guard > DHCP Snooping
LABEL DESCRIPTION
Database Status
This section displays the current settings for the DHCP snooping database. You can
configure them in the DHCP Snooping Configure screen. See Section 27.5 on page
245.
Agent URL This field displays the location of the DHCP snooping database.
Write delay timer This field displays how long (in seconds) the Switch tries to complete a specific
update in the DHCP snooping database before it gives up.
Abort timer This field displays how long (in seconds) the Switch waits to update the DHCP
snooping database after the current bindings change.
This section displays information about the current update and the next update of the
DHCP snooping database.
To Next Page
Loading...
