Chapter 8 Basic Setting
MGS3520 Series User’s Guide
95
Figure 40 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup
The following table describes the labels in this screen.
8.8.7 IPv6 Neighbor Discovery Setup
Use this screen to configure neighbor discovery settings for each interface. Click the link next to
IPv6 Neighbor Discovery Setup in the IPv6 Configuration screen to display the screen as
shown next.
Table 22 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup
LABEL DESCRIPTION
Interface Select the IPv6 interface you want to configure.
IPv6 Global Address Manually configure a static IPv6 global address for the interface.
Prefix Length Specify an IPv6 prefix length that specifies how many most significant bits (start from
the left) in the address compose the network address.
EUI-64 Select this option to have the interface ID be generated automatically using the EUI-
64 format.
Add Click Add to create a new entry or update an existing one.
Cancel Click Cancel to begin configuring this screen afresh.
Clear Click Clear to reset the fields to the factory defaults.
Index This is the interface index number. Click on an index number to change the settings.
Interface This is the name of the IPv6 interface you created.
IPv6 Global Address/
Prefix Length
This field displays the IPv6 global address and prefix length for the interface.
EUI-64 This shows whether the interface ID of the global address is generated using the EUI-
64 format.
Delete Check the entry(ies) that you want to remove in the Delete column and then click
Delete to remove the selected entry(ies) from the summary table.
Cancel Click Cancel to clear the Delete check boxes.
To Next Page
Loading...
