ZyXEL Communications MSC1000G - Sys Date Show Command

Chapter 34 sys Commands
Management Switch Card User’s Guide
1043
34.3.11 sys date show Command
Syntax:
sys date show
This command displays the system’s current date. An example is shown next.
34.3.12 sys date set Command
Syntax:
sys date set <yyyy> <mm> <dd>
This command sets the system’s date. An example is shown next.
34.3.13 sys timeserver show Command
Syntax:
sys timeserver show
This command displays the system’s time server settings. An example is shown next.
34.3.14 sys timeserver set Command
Syntax:
sys timeserver none
sys timeserver daytime <ip-address> [sync]
sys timeserver time|ntp <ip-address> <utc[<+|->0100~1200]> [sync]
where
ras> sys date show
current date is Wed 2006/01/25
ras>
ras> sys date set 2006 01 27
ras> sys timeserver show
protocol: none
server : 0.0.0.0
timezone: utc
ras>
none =
Sets the system to not use a time server.