ZyXEL Communications MSC1000G - Sys Syslog Enable Command

Chapter 34 sys Commands
Management Switch Card User’s Guide
1056
34.5.2 sys syslog enable Command
Syntax:
sys syslog enable
This command sets the system to send logs to an external syslog server. An example is shown next.
34.5.3 sys syslog disable Command
Syntax:
sys syslog disable
This command sets the system to not send logs to an external syslog server. An example is shown
next.
34.5.4 sys syslog show Command
Syntax:
sys syslog show
This command displays the syslog settings. An example is shown next.
34.6 sys user Commands
Use these commands to configure the system’s administrator accounts and authentication settings.
ras> sys syslog enable
ras> sys syslog disable
ras> sys syslog show
status : disabled
facility server ip
-------- ---------------
local1 0.0.0.0
local2 0.0.0.0
local3 192.168.1.43
local4 0.0.0.0
local5 0.0.0.0
local6 0.0.0.0
local7 0.0.0.0
ras>