ZyXEL Communications MSC1000G - Page 1066

Chapter 36 voip Commands
Management Switch Card User’s Guide
1066
route
delete
default|<ip>
[/<netmask>]
[<gateway>]
MSC1024GC only. Removes specified route entry of a
specified slot.
default : Route 0.0.0.0/0
ip: route IP
netmask: network mask: 0 ~ 32
8
route set default|<ip>
[/<netmask>]
<gateway_ip>
[<metric>]
MSC1024GC only. Configures a routing entry of specified
slot.
Note: There are at most 16 routing entries in a slot.
default : Route 0.0.0.0/0
ip: route IP
netmask: network mask: 0 ~ 32, default value is 32.
gateway_ip: gateway IP
metric: metric number of the route 1 ~ 15, default
value is 1.
By default, no routing table entry is defined.
8
route
show
MSC1024GC only. Displays the contents of the routing
table.
1
set sip <ip_s>
[/<mask_s>]
<vid_s> rtp <ip_m>
[/<mask_m>]
<vid_m>
MSC1024GC only. Configures the IP address and VLAN
ID of a specified slot.
ip_s: IP address of SIP signaling IP
ip_m: IP address of rtp media IP
mask_s: network mask of SIP signaling IP: 0 ~ 32
mask_m: network mask of RTP media IP: 0 ~ 32
vid_s: VLAN ID of SIP signaling IP: 1 ~ 4094
vid_m: VLAN ID of rtp media IP: 1 ~ 4094
8
show
MSC1024GC only. Displays the IP configuration. 1
sip keypattern delete <name>
Removes the specified key pattern table. 8
map [<name>]
Displays the SIP call service profile(s) that refer(s) to the
specified key pattern table.
name: The key pattern table name (<=32 characters).
1
set <name> <service-
type> <pattern>
Defines the keys a subscriber presses to access a
particular call service.
8
show [name]
Lists the configured keypattern profiles or
displays the settings of the specified profile.
1
sip localcall show
Displays related configurations of local call. 1
sync
G and GB models. Updates the VOP cards with the
MSC’s latest VOP card IP address, port number, and
telephone number settings.
8
Table 390 voip Commands (continued)
COMMAND DESCRIPTION P