ZyXEL Communications MSC1000G - Voip Ip Set Command

Chapter 36 voip Commands
Management Switch Card User’s Guide
1080
36.8.1 voip ip set Command
Syntax:
voip ip set <slot> <ip-address>[/<netmask>] <vid>
Use this command to configure the IP address, netmask and VLAN ID of the specified voIP line
card.
The following example sets the VoIP line card in slot 4 to use the IP address 111.11.11.1 with a 24-
bit subnet mask (255.255.255.0) and VLAN ID 22.
36.8.2 voip ip dns Command
Syntax:
voip ip dns <slot> <dns-ip>
where
This command sets the DNS (Domain Name Service) server IP address for the specified VoIP line
card.
The following example sets the VoIP line card in slot 4 to use the DNS server at 123.44.55.66.
36.8.3 voip ip show Command
Syntax:
voip ip show <slot>
This command shows the IP address, VLAN ID and DNS server IP address used by the specified
VoIP line card.
The following example shows the information for the VoIP line card in slot 4.
ras> voip ip set 4 111.11.11.1/24 22
<dns-ip> =
The IP address of the DNS server.
ras> voip ip dns 4 123.44.55.66
ras> voip ip show 4
slot ip/mask vid dns
==== ================== === ===============
4 111.11.11.1 /24 22 123.44.55.66