ZyXEL Communications MSC1000G - Voip Sip Ip Command (MSC10124 GC)

Chapter 36 voip Commands
Management Switch Card User’s Guide
1088
This command displays the dial plans configured on this line card when no dialplan is specified, and
the contents of a dial plan table when specified. An example is shown next.
36.14 voip sip ip Command (MSC10124GC)
Use these commands to manage the detail settings related to the VoIP SIP line cards.
36.14.1 voip sip ip dns Command (MSC10124GC)
Syntax:
voip sip ip dns <ip>
where
This command sets the DNS (Domain Name Service) server IP address for the specified VoIP line card. If the IP
addres is set to 0.0.0.0, this means that the system will not use DNS resolving.
36.14.2 voip sip ip ping Command (MSC10124GC)
Syntax:
voip sip ip ping sip|rtp <ip> [-n <count>|-l<size> |-t]
36.14.3 voip sip ip route delete Command (MSC10124GC)
Syntax:
voip sip ip route delete default|<ip> [/<netmask>] [<gateway>]
where
This command removes specified route entry of a specified slot.
ras> voip sip dialplan show
Dialplan Name(s):
----------------------
1. DEFVAL
2. dialplan1
ras> voip sip dialplan show dialplan1
dialplan name : dialplan1
pattern : 0033334444
num-of-prefix-cut : 2
sip-server : SIPprofile1
prefix-add-digits :
number-of-digits : 10
interdigit-timeout : 5
<ip> =
The IP address of the DNS server.
<ip> =
The IP address of the DNS server.
<netmask
>
=
This is the network mask: 0 ~ 32.