ZyXEL Communications MSC1000G - Voip Sip Localhelp Commands

Chapter 36 voip Commands
Management Switch Card User’s Guide
1094
36.19 voip sip localhelp Commands
Use these commands to manage the local help feature used by the VoIP line cards. Local help lets
you configure which local subscribers are called instead of public emergency (or other) numbers in
the event that the link to the VoIP provider is not available.
36.19.1 voip sip localhelp delete Command
Syntax:
voip sip localhelp delete <name>
where
This command removes the specified local help table. An example is shown to delete the local help
table named “localhelp_table”.
36.19.2 voip sip localhelp map Command
Syntax:
voip sip localhelp map [<name>]
This command displays the SIP call service profile(s) that refer(s) to the specified local help table.
An example is shown using the local help table named “localhelp_table”.
36.19.3 voip sip localhelp set Command
Syntax:
voip sip localhelp set <name> <index> [<tel-number>]
where
This command configures the telephone number of the specified index in the specified local help
table. An example is shown to delete the local help table named “localhelp_table”.
<name> =
The local help table name (<=32 characters).
ras> voip sip localhelp delete localhelp_table
ras> voip sip localhelp map localhelp_table
<name> =
The local help table name (<=32 characters).
<index> =
The index number of an entry in the emergency table (1~16).
<tel-number> =
The telephone number entry (<=16 digits).
ras> voip sip localhelp set localhelp_table 1 33334444