ZyXEL Communications MSC1000G - Voip Sip Localhelp Show Command

Chapter 36 voip Commands
Management Switch Card User’s Guide
1095
36.19.4 voip sip localhelp show Command
Syntax:
voip sip localhelp show [<name>]
This command displays contents of the specified local help table. An example is shown to display
the local help table named “local help_table”.
36.20 voip sip numberplan Commands
Use these commands to manage the numbering plans used by the VoIP line cards. The numbering
plans translate dialed numbers according to the rules you set.
36.20.1 voip sip numberplan delete Command
Syntax:
voip sip numberplan delete <name>
This command removes the specified SIP numbering plan table. An example is shown to delete the
numbering plan table named “numplan_table”.
36.20.2 voip sip numberplan map Command
Syntax:
voip sip numberplan map [<name>]
This command displays which SIP call service profiles refer to the specified SIP numbering plan
table. An example is shown, displaying the SIP call service profiles that map to a numbering plan
table named “numplan_table”.
ras> voip sip localhelp show localhelp_table
localhelp name : localhelp_table
index tel-number
----- ----------------
1 33334444
2
ras> voip sip numberplan delete numplan_table
ras> voip sip numberplan map numplan_table
index name
----- --------------------------------
1 . grilp
2 . sw