Chapter 5 Alarm Screens
Management Switch Card User’s Guide
157
LT_ACTIVE INFO X A line card became active.
LT_INACTIVE MAJOR X A line card became inactive.
LT_FW_UPLOAD_OK INFO X X X Firmware was successfully uploaded to a
card.
LT_FW_UPLOAD_FAIL MAJOR X X X Firmware upload to a card failed.
LT_ENABLE INFO X Line card enabled.
LT_DISABLE INFO X Line card disabled.
LT_RESET INFO X Line card reset.
NT_SWITCH_OVER MAJOR X The MSC in standby mode becomes
active.
CPU_UTIL_HIGH MAJOR X The MSC is overloading.
VOP_BATTERY_FAIL CRITICAL X A VOP card’s battery failed.
VOP_CLOCK_FAIL CRITICAL X A VOP card’s clock failed.
VOP_RINGER_FAULT CRITICAL X A VOP card’s ringer failed.
PKTBUFF_LOW MAJOR The buffer storage for packet
transmission is too low. This might cause
some incoming packets to be dropped.
MEMORY_USAGE_HIGH MAJOR The memory usage is too high.
STP_NEW_ROOT MINOR Spanning Tree Protocol (STP) detects a
new root bridge.
STP_PORT_STATE_CHANG
E
MINOR STP detects a port’s status changed.
STP_PORT_ROLE_CHANGE MINOR STP detects a port’s role changed.
System
REBOOT INFO X The system restarted.
CONFIG_CHANGE INFO X The system configuration has changed.
CONFIG_UPLOAD_OK INFO X Uploading of the system configuration
was successful.
CONFIG_UPLOAD_FAIL MAJOR X Uploading of the system configuration
failed.
TIME_SYNC_FAIL MINOR X Synchronizing the time with a timeserver
failed.
ALARM_CUT_OFF INFO X An administrator cutoff (canceled) an
alarm.
ALARM_CLEAR INFO X An administrator cleared the alarms.
LOGIN_FAIL MINOR X A user failed to login.
LOGIN_OK INFO X A user logged in successfully.
ACCOUNT_ADD INFO X A user account was added.
ACCOUNT_DELETE INFO X A user account was deleted.
ACCOUNT_MODIFY INFO X A user’s account was modified.
SVR_SYNC_PROF_OK INFO X Server-initiated profile synchronization is
successful.
SVR_SYNC_PROF_FAIL INFO X Server-initiated profile synchronization
failed.
Table 60 Alarm Descriptions (continued)
ALARM SEVERITY MSC ALC SLC VLC VOP IMA DESCRIPTION
To Next Page
Loading...
