Chapter 9 Subscriber Port Setup Screens
Management Switch Card User’s Guide
212
9.6 Default Settings
The default profiles always exists and all of the DSL ports use the default profile settings when the
line card is shipped. The default profiles are named DEFVAL. Refer to the chapter on initial
configuration for the settings of the default profile and DSL port default settings.
9.7 ADSL Port Setup
Click Port > ADSL in the navigation panel to open the following screen. Use this screen to
configure settings for individual ADSL ports.
Figure 129 ADSL Port Setup
The following table describes the fields in this screen.
Table 94 ADSL Port Setup
LABEL DESCRIPTION
Slot Select the number of a line card’s slot. The corresponding subscriber port setup screen for
the type of line card you selected automatically displays.
Port Select the number of a DSL port on the line card.
Load Click Load to display the port’s settings in the fields below.
Enable Select this check box to turn on this port.
To Next Page
Loading...
