Chapter 9 Subscriber Port Setup Screens
Management Switch Card User’s Guide
245
Figure 152 Port > VDSL2
The following table describes the fields in this screen.
Table 109 Port > VDSL2
LABEL DESCRIPTION
Slot Select the number of a line card’s slot. The corresponding subscriber port setup screen for
the type of line card you selected automatically displays.
Port Select the number of a DSL port on the line card.
Load Click Load to display the port’s settings in the fields below.
Enable Select this check box to turn on this port.
VDSL2 Template
Profile
Select a VDSL2 template profile of VDSL2 settings to assign to this port. Use the Profile >
VDSL2 screen to configure VDSL port profiles.
Alarm Template
Profile
Select an alarm profile to define the thresholds that trigger an alarm on the port when
exceeded.Use the Profile > Alarm VDSL2 screen to configure VDSL alarm template
profiles.
Rate Limit
Profile
Select a rate limit profile to apply to the subscriber connected to this port. The profile sets
maximum speed settings for traffic coming from or going to the subscriber. See Section
11.26 on page 406 for how to configure a profile.
Queue Rate
Limit Profile
Select a profile of per-queue rate limiting parameters to assign to this port.
To Next Page
Loading...
