Chapter 9 Subscriber Port Setup Screens
Management Switch Card User’s Guide
288
9.24 Advanced SIP Port Setup Screen
Use this screen to configure the VoIP settings of a port on your SIP VoIP line card. Click a port
number in the Port SIP Setup Line Card screen (see Section 9.23 on page 286). The following
screen displays.
Note: The fields that display in this screen are the same as those in the SIP Port Setup
screen (see Section 9.22 on page 283).
Figure 185 The Advanced Port SIP Setup Screen
Enable Select a check box in this column to activate a port. Select the check box at the top
of the column to activate all of the line card’s ports.
Customer Information Enter information to identify the subscriber connected to this port. You can use up to
31 printable English keyboard characters (including spaces and hyphens).
SIP Profile Select the SIP profile the port is to use. If you have not configured any profiles, only
the default profile DEFVAL can be selected. Configure SIP profiles in the Profile >
VoIP SIP screen.
Call Service Profile Select the call service profile the port is to use. If you have not configured any
profiles, only the default profile DEFVAL can be selected. Configure call service
profiles in the Profile > VoIP SIP CALLSVC screen.
DSP Profile Select the digital sound processing profile the port is to use. If you have not
configured any profiles, only the default profile DEFVAL can be selected. Configure
DSP profiles in the Profile > VoIP DSP screen.
Select Use this column to choose a port from which you want to copy settings.
Table 130 The Port > VoIP SIP Setup > SIP Port Setup Line Card Screen
LABEL DESCRIPTION
To Next Page
Loading...
