Chapter 11 Profile Screens
Management Switch Card User’s Guide
374
11.19 The Profile VoIP SIP Screen
Use this screen to configure basic information about the SIP accounts used by the VoIP line cards.
You can then select a set of SIP account information (known as a profile) and assign it to a port in
the Port > VoIP SIP screen.
Click Profile > VoIP SIP. The following screen displays.
Figure 240 Profile > VoIP SIP
The following table describes the labels in this screen.
Modify Select a profile’s Select radio button and click Modify to edit the profile.
Delete Select a profile’s Select radio button and click Delete to remove the profile.
Table 176 IGMP Filter Profile (continued)
LABEL DESCRIPTION
Table 177 Profile > VoIP SIP
LABEL DESCRIPTION
Name Enter a descriptive name for this SIP profile (up to 31 ASCII characters; spaces
are not allowed).
SIP Server IP / Domain
Name
Enter the IP address or domain name of your VoIP provider’s SIP server. You can
use up to 64 printable ASCII characters. It does not matter whether the SIP
server is a proxy, redirect or register server.
To Next Page
Loading...
