Chapter 11 Profile Screens
Management Switch Card User’s Guide
399
5 Create PVC 0/34 and Apply the Video_WRR IPQoS Profile
5a In the navigation panel, click Port > PVC to open the PVC Setup screen.
5b Select the slot where the line card is installed and port 3. Click Load.
5c Click Delete.
Figure 263 Video_WRR PVC Setup Screen PVC 0/34
5d In the VPI/VCI fields, enter “0” and “34”.
5e Enter 2 in the PVID field.
5f In the Profile field, select “Video_WRR”.
5g Click Apply.
6 Create PVC 0/35 and Apply the Data_WRR Profile
6a In the navigation panel, click Port > PVC to open the PVC Setup screen.
6b Select the slot where the line card is installed and port 2. Click Load.
Figure 264 Data_WRR PVC Setup Screen PVC 0/35
6c In the VPI/VCI fields, enter “0” and “35”.
6d Enter 3 in the PVID field.
6e In the Profile field, select “Data_WRR”.
To Next Page
Loading...
