Chapter 12 Statistics Screens
Management Switch Card User’s Guide
422
Figure 279 IP Bridge Interfaces
The following table describes the labels in this screen.
12.9 IP Bridge Routes Screen
Use this screen to look at the routing table for a domain. This table includes all the entries, whether
added automatically by the system or provided manually.
To open this screen, click Statistics > IP Bridge > Route.
Figure 280 IP Bridge Routes
Table 198 IP Bridge Interfaces
LABEL DESCRIPTION
Index This field displays the index number of the downlink interface.
Domain This field displays the name of the domain to which this entry applies.
Interface IP,
NetMask
These fields display the IP address and the number of bits in the subnet mask that define the
range of IP addresses to which this downlink interface applies. If the destination IP address of
a packet is in this range, the system tries to forward the frame to a subscriber in the specified
VLAN and PVC, if any.
VID This field displays the VLAN ID the subscriber is in.
Slot This field displays the number of the slot that contains the line card with the port number to
which the system forwards frames.
Port This field displays the line card’s port number to which the device is connected. It displays “-”
if the system looks for the subscriber in the whole VLAN and not a specific PVC.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI), if any.
The VPI and VCI identify a channel on this port.
To Next Page
Loading...
