Chapter 12 Statistics Screens
Management Switch Card User’s Guide
509
Figure 347 Statistics > Loop Guard
The following table describes the labels in this screen.
12.26 MAC Forced Forwarding Statistics
Click Statistics > MACFF in the navigation panel to display the screen as shown.
Table 264 Statistics > Loop Guard
LABEL DESCRIPTION
Slot Select a card’s slot number and click Load to display the cards loop guard.
Port No. This column lists the card’s ports.
Port Status This field displays whether or not the port is enabled.
Loop Guard Status This field displays whether loop guard is enabled or disabled for this individual port.
Total TX Packets This is the total number of packets the port has sent.
Total RX Packets This is the total number of packets the port has received.
Bad Packets This is the number of packets the loop guard feature has detected that looped back to the
port.
Shutdown Time If the loop guard feature detected looped back packets on this port and shut it down, the
time that it did so displays here.
To Next Page
Loading...
