Chapter 12 Statistics Screens
Management Switch Card User’s Guide
511
Figure 349 Statistics > PVC
The following table describes the labels in this screen.
Table 266 Statistics > PVC
LABEL DESCRIPTION
Slot
Port
Use the drop-down list boxes to select a DSL line card and port.
Load Click Load to display the port’s current settings.
Index This is the index number of an entry.
VPI/VCI For an ALC, SLC or a VLC port, this field displays the Virtual Path Identifier (VPI) and
Virtual Circuit Identifier (VCI)
Type This field displays the type of the PVC. All possible values are pvc, ppvc, ppvc member,
paepvc, tlspvc, rpvc, ipbpvc, dtpvc, and iwfpvc (means port vdsl2 pvc).
Mux This field displays the encapsulation method used for the PVC. LLC-based (llc) or VC-
based multiplexing (vc) or auto.
State If the you select auto in the Mux field above, this field displays the PVC type and the
encapsulation method the connected CPE device uses. The possible values are pvc llc,
pvc vc, paepvc llc, paepvc vc. Otherwise, this field is empty.
To Next Page
Loading...
