ZyXEL Communications MSC1000G - Switch CFM LBR Screen

Chapter 13 Switch Screens
Management Switch Card User’s Guide
545
Figure 376 CFM Endpoint: MIP > Slot
The following table describes the labels in this screen.
13.19.5 Switch CFM LBR Screen
Click Switch > CFM > LBR to display the screen shown next. Use this screen to enable or disable
loopback testing on individual ports. LBR stands for Loop Back Response.
Table 290 CFM Endpoint: MIP > Slot
LABEL DESCRIPTION
Port This field displays the number of the DSL port.
Enable This field displays whether or not the port is set to be a MIP.