Chapter 13 Switch Screens
Management Switch Card User’s Guide
555
Figure 384 LLDP Port
The following table describes the labels in this screen.
Table 297 LLDP Port
LABEL DESCRIPTION
Local Port Select an MSC port and click Load to display and be able to configure its settings.
Admin Status Select how the MSC uses LLDP on this port.
disable has the MSC not send or receive LLDP information through this port.
tx has the MSC send LLDP information through this port.
rx has the MSC receive LLDP information through this port.
tx-rx has the MSC send and receive LLDP information through this port.
Notify Enable or disable the sending of remote change notifications through this port.
Chassis ID This is the identifier for the system.
To Next Page
Loading...
