ZyXEL Communications MSC1000G - Acl Dot1 X Port Period Command

Chapter 19 acl Commands
Management Switch Card User’s Guide
666
19.8.6 acl dot1x port period Command
Syntax:
acl dot1x port period <slot-port> <secs>
where
This command sets the IEEE 802.1x re-authentication period for the specified subscriber ports.
19.8.7 acl dot1x port reauth Command
Syntax:
acl dot1x port reauth <slot-port> on|off
This command enables or disables the IEEE 802.1x re-authentication option for the specified
subscriber ports.
19.8.8 acl dot1x port show Command
Syntax:
acl dot1x port show <slot>
This command displays the IEEE 802.1x settings of the subscriber ports on the line card in the
specified slot.
19.8.9 acl dot1x radius ip Command
Syntax:
acl dot1x radius ip <index> <ip-address>
<secs> =
Sets the IEEE 802.1x re-authentication period in seconds
(60~65535).
ras> acl dot1x port show 5
port enable control reauth period
---- ------ ------- ------ ------
5- 1 - auto V 3600
5- 2 - auto V 3600
5- 3 - auto V 3600
5- 4 - auto V 3600
5- 5 - auto V 3600
-------------------------- [snip] --------------------------
5-45 - auto V 3600
5-46 - auto V 3600
5-47 - auto V 3600
5-48 - auto V 3600