ZyXEL Communications MSC1000G - Acl Dot1 X Radius Port Command

Chapter 19 acl Commands
Management Switch Card User’s Guide
667
where
This command sets the IP address of the specified external RADIUS server.
19.8.10 acl dot1x radius port Command
Syntax:
acl dot1x radius port <index> <port>
where
This command sets the external RADIUS server port number of the specified RADIUS server.
19.8.11 acl dot1x radius secret Command
Syntax:
acl dot1x radius secret <index> <secret_key>
where
This command sets the authentication and encryption keys of the specified RADIUS server.
19.8.12 acl dot1x show Command
Syntax:
acl dot1x show
This command displays the status of the IEEE 802.1x feature and the external RADIUS server
settings.
<index> =
The index number of an external RADIUS server entry (1 or 2).
<ip-address> =
This IP address of the external RADIUS server.
<index> =
The index number of an external RADIUS server entry (1 or 2).
<port> =
The RADIUS server port number.
<index> =
The index number of an external RADIUS server entry (1 or 2).
<secret_key> =
The authentication and encryption keys of the specified RADIUS server.
ras> acl dot1 show
dot1x feature is disable
radius servers:
no ip port secret
-- --------------- ----- -------------------------------
1 0.0.0.0 1812 1234
2 0.0.0.0 1812 1234