ZyXEL Communications MSC1000G - Acl Ouifilter Enable Command

Chapter 19 acl Commands
Management Switch Card User’s Guide
674
19.13.2 acl ouifilter enable Command
Syntax:
acl ouifilter enable <slot-port>
This command activates MAC OUI filtering on the port(s) of the specified line card.
19.13.3 acl ouifilter mode Command
Syntax:
acl ouifilter mode <slot-port> accept|deny
where
This command activates MAC OUI filtering on the port(s) of the specified line card. Use the acl
ouifilter set
command to set the OUI value(s).
The following example sets the system to drop packets with the specified OUI value on port 1 of the
line card in slot 3.
19.13.4 acl ouifilter set Command
Syntax:
acl ouifilter set <slot-port> <mac>
where
This command specifies a MAC OUI whose packets you want to filter. Use the acl ouifilter
mode
command to set the action on the matched packets.
The following example sets the system to filter packets with an OUI value of 00-0F-FE on port 1 of
the line card in slot 3.
accept|deny =
accept: Allows frames from MAC addresses with the OUI(s) that you specify
and blocks frames with MAC addresses of other OUIs.
deny: Blocks frames from MAC addresses with the OUI(s) that you specify
and allows frames from other MAC addresses.
ras> acl ouifilter mode 3-1 deny
<mac> =
The first three octets of a MAC address in the format xx:xx:xx. For example, 00:0F:FE.
ras> acl ouifilter set 3-1 00:0f:fe