ZyXEL Communications MSC1000G - Multicast Mvlan Delete Command

Chapter 28 multicast Commands
Management Switch Card User’s Guide
750
Multicast VLAN allows one single multicast VLAN to be shared among different subscriber VLANs on
the network. This improves bandwidth utilization by reducing multicast traffic in the subscriber
VLANs and simplifies multicast group management.
28.11.1 multicast mvlan delete Command
Syntax:
multicast mvlan delete <vid>
This command removes the specified multicast VLAN configuration.
28.11.2 multicast mvlan disable Command
Syntax:
multicast mvlan disable <vid>
This command deactivates the specified multicast VLAN. The following example disables multicast
VLAN 12.
28.11.3 multicast mvlan enable Command
Syntax:
multicast mvlan enable <vid>
This command activates the specified multicast VLAN.
28.11.4 multicast mvlan group delete Command
Syntax:
multicast mvlan group delete <vid> <index>
This command removes the specified multicast VLAN group setting.
28.11.5 multicast mvlan group set Command
Syntax:
multicast mvlan group set <vid> <index> <start-mcast-ip> <end-mcast-ip>
where:
ras> multicast mvlan disable 12
<index> =
Multicast group number (1 -16).
<start-mcast-ip> =
Start of the multicast IP address range.
<end-mcast-ip> =
End of the multicast IP address range.