ZyXEL Communications MSC1000G - Page 846

Chapter 30 profile Commands
Management Switch Card User’s Guide
846
usage: set <profile>
[xtucfecs <xtucfecs>]
[xtuces <xtuces>]
[xtucses
<xtucses>][xtucloss
<xtucloss>] [xtuclofs
<xtuclofs>]
[xtucuas <xtucuas>]
[xturfecs <xturfecs>]
[xtures <xtures>]
[xturses <xturses>]
[xturloss <xturloss>]
[xturlofs <xturlofs>]
[xturlprs <xturlprs>]
[xturuas <xturuas>]
[fullinit <fullinit>]
[xtuclols <xtuclols>]
Creates an alarm VDSL2 line profile of 15
minute period alarm thresholds. A 0 has the
system ignore that threshold.
profile: profile name, up to 31 characters
xtucfecs: the number of Forward Error
Correction Seconds (FECS) allowed on the
system. 0~900 in seconds, 0 means disable.
xtuces: the number of Errored Seconds
(ES) allowed on the system. 0~900 in
seconds, 0 means disable.
xtucses: the number of Severely Errored
Seconds (SES) errors allowed on the
system. 0~900 in seconds, 0 means disable.
xtucloss: The number of Loss of Signal
Seconds(LoSS) allowed on the system.
0~900 in seconds, 0 means disable.
xtuclofs: The number of Loss of Framing
Seconds (LoFS) allowed on the system. 0~900 in
seconds, 0 means disable.
xtucuas: The number of UnAvailable
Seconds (UAS) errors allowed on the
system. 0~900 in seconds, 0 means disable.
xturfecs: The number of Forward Error
Correction Seconds (FECS) allowed on CPE
devices. 0~900 in seconds, 0 means disable.
xtures: The number of Errored Seconds (ES)
allowed on CPE devices. 0~900 in seconds, 0
means disable.
xturses: The number of Severely Errored
Seconds (SES) errors allowed on CPE devices.
0~900 in seconds, 0 means disable.
xturloss: The number of Loss of Signal (Los)
errors allowed on CPE devices. 0~900 in
seconds, 0 means disable.
xturlofs: The number of Loss of Framing
(LoF) errors allowed on CPE devices. 0~900 in
seconds, 0 means disable.
xturlprs: The number of Loss of PoweR (LPR)
errors allowed on CPE devices. 0~900 in
seconds, 0 means disable.
xturuas: The number of UnAvailable Seconds
(UAS) errors allowed on CPE devices. 0~900 in
seconds, 0 means disable.
fullinit: The number of times a full
initialization is allowed to fail.
0~4294967295 in times, 0 means disable.
xtuclols: The number Loss of Link
Seconds (LOLS) allowed. 0~900 in seconds,
0 means disable.
8
Table 366 profile Commands (continued)
COMMAND DESCRIPTION P