ZyXEL Communications MSC1000G - Page 851

Chapter 30 profile Commands
Management Switch Card User’s Guide
851
set <profile> <us-max-rate>
<ds-max-rate> [fast|delay
<us-delay> <ds-delay>]
[minrate <us-min-rate> <ds-
min-rate>] [usmgn <us-max-
mgn> <us-min-mgn> <us-tgt-
mgn>] [dsmgn <ds-max-mgn>
<ds-min-mgn> <ds-tgt-mgn>]
[hamband <mask>] [custom1
<start <stop>] [custom2
<start> <stop>] [usinp
<usinp>] [dsinp <dsinp>]
[limitmask <maskid>]
[option <option>] [upboesel
<esel>] [epsd <<tone>
<psd> […]>|<psdid>][esel
<esel>] [escma <escma>]
[escmb <escmb>][escmc
escmc>] [mus<mus>][fmin
<fmin>] [fmax<fmax>]
[vdslprofile <vdslprofile>]
Creates a VDSL line profile. See Section
30.17.3 on page 892 for more information.
8
show [profile]
Lists the VDSL port setting profiles or a
specific profile’s settings.
1
vdsl2 chanprofi
le
delete <profile>
Removes a VDSL2 channel profile. 8
Table 366 profile Commands (continued)
COMMAND DESCRIPTION P