ZyXEL Communications MSC1000G - Profile Alarmshdsl Delete Command

Chapter 30 profile Commands
Management Switch Card User’s Guide
875
30.8.3 profile alarmshdsl delete Command
Syntax:
profile alarmshdsl delete <profile>
where
This command allows you to delete an individual SHDSL alarm profile by its name. You cannot
delete the DEFVAL alarm profile.
The following example deletes the SESalarm alarm profile.
30.8.4 profile alarmshdsl map Command
Syntax:
profile alarmshdsl map <profile>
where
This command displays which SHDSL ports are set to use the specified alarmshdsl profile.
The following example displays which SHDSL ports use the SESalarm alarmshdsl profile.
30.9 profile alarmvdsl Commands
Configure alarmvdsl profiles to set alarm settings and thresholds for the VDSL ports.
30.9.1 profile alarmvdsl show Command
Syntax:
profile alarmvdsl show [<profile>]
where
<profile>
=
The name of an alarm profile.
ras> profile alarmshdsl delete SESalarm
<profile>
=
The name of an alarm profile.
ras> profile alarmshdsl map SESalarm
<profile>
=
The name of an alarm profile.