ZyXEL Communications MSC1000G - Profile Voip Sip Callsvc Commands

Chapter 30 profile Commands
Management Switch Card User’s Guide
911
This command displays the settings of the specified SIP profile, or displays the names of all SIP
profiles if none is specified. An example is shown next.
30.22 profile voip sip callsvc Commands
Use these commands to set up and manage the VoIP call service profiles. The call service profiles
contain details about individual SIP accounts, as well as controlling the call services the subscribers
can use.
30.22.1 profile voip sip callsvc delete Command
Syntax:
profile voip sip callsvc delete <name>
This command removes the specified SIP call service profile. An example is shown to delete the call
service profile named “sp16”.
30.22.2 profile voip sip callsvc map Command
Syntax:
profile voip sip callsvc map <name>
ras> profile voip sip show
sip profile(s):
---------------------
1. DEFVAL
2. sip10
MSC1024GC# profile voip sip show sip10
sip profile : sip10
sip-dn : host1.domain1
sip-port : 5061
regsvr-dn : host2.domain2
regsvr-port : 5062
proxysvr-dn : host3.domain3
proxysvr-port : 5063
pbit : 5
dscp : 36
keepalive : on 1000 seconds
prack : on
switchtype : DEFVAL
registration-expire : on 3600 seconds
registration-retry : 180 seconds
prefix :
start-rtp-port : 55000
end-rtp-port : 60000
ras> profile voip sip callsvc delete sp16