ZyXEL Communications MSC1000G - Page 931

Chapter 32 show Commands
Management Switch Card User’s Guide
931
interface [<ip/
mask>|<vid|
<ip/mask>
<vid>]
Displays runtime interfaces. 1
route [<domain>]|
[<ip/
mask>]|[<do
main> <ip/
mask>]]
Display runtime routing table. 1
lineinfo <slot-port> [data|pots]
Displays line information. 1
lineperf <slot-port>
Displays line performance statistics. 1
linerate <slot-port>
Displays line rate values. 1
linestat <slot-port> [data|pots]
Displays link status. 1
loopguard <slot>|
<slot-
port>|<giga-port>
Displays loopguard status. 1
mac [<giga-
port>|<mac>|<slot
>|<slot-port>|vid
<vid1>[-<vid2>]]
Displays a port’s IEEE 802.1d MAC address
forwarding table.
1
macff arp counter port <slot-port>
Displays the subscriber port’s MAC forced
forwarding ARP request and ARP reply packet
statistics.
1
arp counter
uplink
<slot>
Displays the card’s uplink port’s MAC forced
forwarding ARP request and ARP reply packet
statistics.
1
arp status <slot>
Displays the card’s MAC forced forwarding ARP
status.
1
status <slot>
Displays the card’s MAC forced forwarding status. 1
monitor <slot>
Displays a card’s hardware monitor statistics. 1
mstp <mstid>
[<end_mstid>]
Displays multiple tree spanning protocol information
for the Ethernet ports.
mstid: This is the multiple tree spanning protocol
index number.
end_mstid: Specify the last MTSP in a range of
MTSPs to be displayed.
1
oam <slot-port>
Displays Ethernet OAM details about a port on an
Ethernet line card.
1
packet <slot-port>
Displays a port’s packet counter. 1
paepvc counter <slot-
port>|<slot
-port-vpi/
vci>
Displays PAE PVC counter statistics. 1
session <slot-
port>|<slot
-port-vpi/
vci>
Displays PAE PVC session information. 1
Table 368 show Commands (continued)
COMMAND DESCRIPTION P