ZyXEL Communications MSC1000G - Show Dhcp Counter Command

Chapter 32 show Commands
Management Switch Card User’s Guide
941
The following is an example.
32.3.6 show dhcp counter Command
Syntax:
show dhcp counter <slot>|<slot-port>
This command displays the number of DHCP related packets received on the port. The following
displays an example (refer to Section 4.2 on page 84 for field descriptions).
32.3.7 show dhcp snoop Command
Syntax:
show dhcp snoop <slot-port>
This command displays the DHCP snooping table on port 2 of the line card in slot 2 (refer to Section
4.4 on page 87 for field descriptions).
32.3.8 show e1 Commands
Syntax:
show e1 status <slot-port>
ras> show dot3ad
[aggregator info]
tsub:
state : disable
members: sub1 sub2
links :
syncs :
tup:
state : disable
members: up1 up2
links :
syncs :
ras> show dhcp counter 2-2
card name: <NULL>
port discover offer request ack overflow
----- -------- -------- -------- -------- --------
2- 2 1 2 1 1 0
ras>
ras> show dhcp snoop 2-2
port 2-2: overflow 0
idx ip mac vid
--- --------------- ----------------- ------
1 123.23.19.4 00:50:ba:2c:70:e1 1
ras>