ZyXEL Communications MSC1000G - Switch Cfm Commands

Chapter 33 switch Commands
Management Switch Card User’s Guide
994
33.5.3 switch cfm Commands
33.5.3.1 switch cfm disable
Syntax:
switch cfm disable
This command disables Connectivity Fault Management (CFM).
33.5.3.2 switch cfm enable
Syntax:
switch cfm enable
This command enables CFM.
33.5.3.3 switch cfm lbr enable
Syntax:
switch cfm lbr enable <giga-port>|<slot-port>
This command enables loopback testing on the specified port on a line card. The following shows an
example.
33.5.3.4 switch cfm lbr disable
Syntax:
switch cfm lbr disable <giga-port>|<slot-port>
This command disables loopback testing on the specified port on a line card. The following example
disables loopback testing on port 2 of the line card in slot 6.
33.5.3.5 switch cfm lbr show
Syntax:
switch cfm lbr show
ras> switch cfm lbr enable 6-1
ras> switch cfm lbr disable 6-2