Chapter 21 Tools
NBG4604 User’s Guide
190
Click Maintenance > Tools. Follow the instructions in this screen to upload
firmware to your NBG4604.
Figure 111 Maintenance > Tools > Firmware
The following table describes the labels in this screen.
Note: Do not turn off the NBG4604 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before
logging into the NBG4604 again.
Figure 112 Upload Warning
Table 71 Maintenance > Tools > Firmware
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click
Browse... to find it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that
you must decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to
two minutes.
To Next Page
Loading...
