Chapter 25 Product Specifications
NBG4604 User’s Guide
212
3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5
cm between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the
weight of the NBG4604 with the connection cables.
5 Align the holes on the back of the NBG4604 with the screws on the wall. Hang the
NBG4604 on the screws.
Figure 126 Wall-mounting Example
The following are dimensions of an M4 tap screw and masonry plug used for wall
mounting. All measurements are in millimeters (mm).
Figure 127 Masonry Plug and M4 Tap Screw
To Next Page
Loading...
