ZyXEL Communications NBG6604 - WPA-PSK;WPA2-PSK

Chapter 10 Wireless LAN
NBG6604 User’s Guide
71
Figure 40 Wireless > Security Mode: No Security
The following table describes the labels in this screen.
10.3.2 WPA-PSK/WPA2-PSK
Select WPA-PSK or WPA2-PSK from the Security Mode list.
Note: WPA-PSK is not available if you enable WPS before you configure WPA-PSK in the
Wireless > Wireless screen.
Table 22 Wireless > Security Mode: No Security
LABEL DESCRIPTION
Security Mode Choose No Security from the drop-down list box.
Apply Click Apply to save your changes back to the NBG6604.
Cancel Click Cancel to reload the previous configuration for this screen.