Chapter 9 Device Management
NR2301 User’s Guide
94
9.12 WPS
WiFi Protected Setup (WPS) allows you to quickly set up a wireless network with security, without having
to configure security settings manually. To set up a WPS connection between two devices, both devices
must support WPS. It is recommended to use the Push Button Configuration (PBC) method if your wireless
client supports it. See Section 9.16.11.3 on page 104 for more information about WPS.
Note: The NR2301 applies the security settings of the main SSID profile (see Chapter 6 on page
48).
Note: If WPS is enabled, UPnP will automatically be turned on.
Click APP MODULE > WPS to display the following screen.
Figure 60 APP MODULE > WPS
To Next Page
Loading...
