• Wireless Mode: Select the wireless standard you want your
network to use. If you are not sure which to select, select 802.11b/
g/n.
• SSID Profile: Select the SSID profile you want to configure for
network access from the drop-down list box.
• Channel: Select the wireless channel you want your network to
use.
• Channel Width: Select the channel bandwidth you want to use. If
you are not sure, select 20/40 MHz.
2. Click Apply to save your settings.
3. Click the SSID tab. If you want to configure advanced settings of an
SSID profile (such as change the profile name, SSID, or security),
select it and click Edit.
To Next Page
Loading...
